1-7/16,Hand Reamer Spiral Flute
Part: #445E228
Hand Reamers are widely used for final sizing of drilled holes. The square on the shank end is suitable for holding in a tap wrench or vise. The cutting edge is ground with a starting taper to provide easy entry. The helical reamer is preferred where there is an interruption to the cut, such as a keyway. size: 1.7/16, length: 12.7/8, flute length: 6.7/16
- Fractional
- High Speed Steel
- Bright & Black
- Spiral Flute
- Straight Shank with Square