7/16,Hand Reamer Straight Flute
Part: #440E128
Hand Reamers are widely used for final sizing of drilled holes. The square on the shank end is suitable for holding in a tap wrench or vise. The cutting edge is ground with a starting taper to provide easy entry. The helical reamer is preferred where there is an interruption to the cut, such as a keyway. size: 7/16, length: 5.1/2, flute length: 2.3/4
- Fractional
- High Speed Steel
- Bright & Black
- Straight Flute
- Straight Shank with Square