7/32,Hand Reamer Straight Flute
Part: #440E114
Hand Reamers are widely used for final sizing of drilled holes. The square on the shank end is suitable for holding in a tap wrench or vise. The cutting edge is ground with a starting taper to provide easy entry. The helical reamer is preferred where there is an interruption to the cut, such as a keyway. size: 7/32, length: 3.3/4, flute length: 1.7/8
- Fractional
- High Speed Steel
- Bright & Black
- Straight Flute
- Straight Shank with Square