21/32Hand Reamer Straight Flute
Part: #440E142
Hand Reamers are widely used for final sizing of drilled holes. The square on the shank end is suitable for holding in a tap wrench or vise. The cutting edge is ground with a starting taper to provide easy entry. The helical reamer is preferred where there is an interruption to the cut, such as a keyway. size: 21/32, length: 7.3/8, flute length: 3.11/16
- Fractional
- High Speed Steel
- Bright & Black
- Straight Flute
- Straight Shank with Square